Basic operation, Before use, Switching the input source – Marantz CD6004 User Manual

Page 11: Set the power to standby

Advertising
background image

8

Getting started

Basic connections

Basic operation

Specifi

cations

Index

Advanced connections

Advanced operations

Explanation of terms

Troubleshooting

ENGLISH

8

Getting started

Basic operation

Basic operation

Specifi

cations

Index

Advanced connections

Advanced operations

Explanation of terms

Troubleshooting

Basic connections

Basic operation

This chapter explains the procedures required to playback a CD,
and the various operations that can be performed during CD
playback.
For other operations, see the sections below.

n Playback of MP3, WMA and AAC fi les (vpage 15)

n Playback iPod® (vpage 17)

n Playing a USB memory device (vpage 18)

n Performing menu settings (vpage 20)

Before use

Set the power to standby

Press

<ON/STANDBY>

or

[POWER]

.

Power is set to standby and the power indicator lights.

Before setting power to standby, make sure the disc tray is completely
closed.

NOTE

• Do not force the tray in by hand while power is set to standby. This

could cause a trouble.

• Even when power is set to standby, electrical current passes through

some circuits. If you do not intend to use the unit for an extended
period of time, unplug the power cord from the household power
outlet.

Switching the input source

This unit supports the following playback functions in addition to disc
playback.
• Playing fi les from USB memory from the front panel USB port.
• Playing iPod fi les from the front panel USB port.
Before playing back fi les from a connected device, perform the
following operation to switch the input source.

Press

<DISC/INPUT>

to select the input source.

The input source changes in the following order each time

<DISC/

INPUT>

is pressed.

Disc

USB

GSelectable itemsH

Disc

Playback the disc inside the disc tray (

vpage 9).

USB

Playback fi les on the device connected to the front

panel USB port (iPod/USB) (

vpage 17,18).

Button located on both the main unit and
the remote control

BUTTON

Button only on the main unit

<BUTTON>

Button only on the remote control

[BUTTON]

Symbols used to indicate buttons in this manual

<ON/STANDBY> <DISC/INPUT>

Power indicator

[POWER]

1.CD6004U_ENG_02A_0706.indd 8

2011/07/14 15:56:31

Advertising