Marantz CD6004 User Manual
Page 22
19
ENGLISH
19
Playing fi les stored on USB memory devices
1
Press
<ON/STANDBY>
.
2
Connect the USB memory device to the USB port on
the front panel of this unit (vpage 14).
3
Press
<DISC/INPUT>
to change the input source to
“USB”.
4
Press
1
.
Playback starts.
To switch the folder or fi le during playback
GUsing the buttons on the unitH
During playback, press
<
8
/
6>
or
<
7
/
9>
.
GUsing the buttons on the remote controlH
• Folder
Use
[FOLDER
d
,
f]
to select the folder, then press
[ENTER]
.
• File
Use
[
8]
or
[
9]
to select the fi le.
The fi le numbers are set automatically when the USB memory device
is loaded.
Stopping playback
Press
2
.
Stopping playback temporarily
Press
3
.
• The
3
indicator lights.
• To restart playback, press
1
or
3
.
Fast-forwarding and fast-reversing (Searching)
GUsing the buttons on the unitH
During playback, press and hold in
<
8
/
6>
or
<
7
/
9>
.
• When you remove your fi nger from the button, normal playback is
resumed.
GUsing the buttons on the remote controlH
During playback, press and hold in
[
6
,
7]
.
• When you remove your fi nger from the button, normal playback is
resumed.
NOTE
When normal playback is resumed after searching, the sound may be
interrupted momentarily.
Playing repeatedly (Repeat playback)
Press
[REPEAT]
.
Playing in random order (Random playback)
During playback or stop mode, press
[RANDOM]
.
• The “RNDM” indicator lights, and random playback starts
automatically.
• To cancel random playback, press
[RANDOM]
or
2
. The “RNDM”
indicator goes dark and random playback is canceled.
Switching the unit display
During playback, press
[TEXT]
.
The information changes in the following order each time
[TEXT]
is
pressed.
File name
Title name
Album name
Artist name
Setting which information is displayed fi rst
You can set which information is displayed fi rst when
[TEXT]
is
pressed.
For details on the settings, see “File Info (File information display
selection)” (
vpage 23).
Playing a USB memory device
Button located on both the main unit and
the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
<
7/9>
<ON/STANDBY> <DISC/INPUT>
<
8/6>
2
1
3
USB port
[RANDOM]
[FOLDER
d, f]
[TIME]
[ENTER]
3
[MENU]
[REPEAT]
[
6, 7]
2
1
[
8, 9]
[TEXT]
[CANCEL]
1.CD6004U_ENG_02A_0706.indd 19
2011/07/14 15:56:41