Marantz CD6004 - Manual (Page 16)

13
ENGLISH
13
Advanced connections
Connecting the flasher input jack
• This is used to control this unit using a keypad from another room.
Set the remote control switch located on the rear panel of the
connected audio component to “EXTERNAL” to use this feature.
• If a flasher input connector is to be used, do not use the remote
control input connector.
NOTE
Use the monaural mini-plug cable for connecting FLASHER IN jacks.
Do not use the stereo mini-plug cable.
Use a optical transmission cable (sold separately) or coaxial digital
cable to connect.
Digital audio output
You can enjoy digital recording when the player is connected to a CD
recorder or other digital recording component.
OPTICAL
IN
COAXIAL
IN
CD recorder /
MD recorder
Signal flow
Signal flow
When connecting the optical digital output connector
with an optical transmission cable (sold separately)
Match the shapes then insert firmly.
Preparations
Connecting cables
Select the cables according to the equipment being connected.
Audio cables
Optical digital connections
Optical cable (sold separately)
Coaxial digital connections
Coaxial digital cable (sold separately)
iPod connections
iPod cable (sold separately)
Remote control connection
Remote connector cable (supplied)
Digital connection This chapter describes how to connect a USB memory device/
iPod and remote control.
For other connections, see the sections below.
n Analog connection (vpage 7)
n Connecting the power cord (vpage 7)
1.CD6004U_ENG_02A_0706.indd 13 2011/07/14 15:56:36