Marantz SA-14S1N - Manual (Page 26)

19
ENGLISH
Playing a USB memory device
Playing files stored on USB memory devices
1 Press DISC/INPUT to change
the input source to “USB”.
2 Connect the USB memory
device to the USB port on
the front panel of this unit
(vpage 10).
3
Use ui to select a file/folder
you want to play back and
press ENTER.
4
Use ui to select a file and
press ENTER.
Playback starts.
n USB operation
Remote
control
buttons
Operation on the unit
1 Playback
3 Pause
2 Stop
ui Moves up / down the cursor
o Calls the menu / returns from the menu
8, 9
Previous / Next
(Press and hold)
Fast-reverse / Fast-forward
REPEAT Switches the repeat function
RANDOM Switches the random function
INFO Switches the display
ENTER
or p
Confirm the settings/playback
• When the menu’s “USB Resume” (vpage 25) is on,
playback starts automatically when a USB memory device
is connected.
• When a USB memory device is connected to this unit,
playback starts automatically when “USB” input source
switching occurs.
n Stopping playback
Press 2.
n Stopping playback temporarily
Press 3.
• The 3 indicator lights.
• To restart playback, press 1.
n To switch file during playback
• Use 8 or 9 to select the file.
n Fast-forwarding and fast-reversing (Searching)
Press and hold 8 or 9 during playback.
• When you remove your finger from the button, normal
playback is resumed.
• When normal playback is resumed after searching, the
sound may be interrupted momentarily.
n Repeat playback
Press REPEAT.
n Random playback
Press RANDOM.
• To cancel random playback, press RANDOM. The
“RNDM” indicator goes dark and random playback is
canceled.
n Switching the display
During playback, press INFO.
NOTE
• Marantz will take no responsibility whatsoever for any loss
or damage to data on a USB memory device when using
it connected to the unit.
• USB memory devices will not work via a USB hub.
• Marantz does not guarantee that all USB memory devices
will operate or be supplied power. When using a USB
portable hard disk that can draw power from an AC
adapter, we recommend using the AC adapter.
n Files that can be played back
• See “USB memory device” (vpage 30).
Removing the USB memory device
1
Press 2 to stop playback.
2 Check that the
communication indicator on
the USB memory device is
not flashing, then pull out
the USB memory device.
NOTE
Do not pull out the USB memory device if the communication
indicator on the USB memory device is still flashing. Doing so
may damage the USB memory device and the data recorded
on the device.