Marantz VP8000 - Manual (Page 14)

13
ENGLISH
OPERATIONS
Refer to the on-screen menu for making various adjustments
and settings.
1. Press the MENU key.
The menu display appears.
2. Use the į/Ĭ keys to select a menu, then press the
ENTER key.
The selected menu appears.
3. Make adjustments in MEMORY SELECT, PICTURE
ADJUST, SETTING or RGB FORMAT.
To display the previous menu Press the MENU key.
THEATER 1
MEMORY SELECT
PICTURE ADJUST
SETTING
RGB FORMAT
The user can adjust the picture to suit own preference by using
the PICTURE ADJUST feature.
1. Use the
ǡ/Ǡ keys to select an item.
2. Use the į/Ĭ keys to change the adjustment level.
To increase the number, press the į key.
To decrease the number, press the Ĭ key.
{ For a video signal input, the following adjustments
can be made:
Note
The user cannot adjust the THEATER STD, NORMAL STD, and
DYNAMIC STD settings.
– CONTRAST
– COLOR TEMP.
H: Make the white color more
blue. This setting is
approximately 12000
degrees in Kelvin.
M: Make white less blue. This
setting is approximately
9300 degrees in Kelvin.
L: Make white more reddish.
This setting is approximately
6500 degrees in Kelvin.
– NOISE REDUCTION
ON: Turn the video noise
reduction circuit on.
OFF: Turn the noise reduction
off.
The user can recall the stored memory preference. This
projector has three picture modes: THEATER, NORMAL and
DYNAMIC. And each picture mode has three picture
memories.
1. Use the ǡ/Ǡ keys to select a picture memory.
2. Use the
į/Ĭ keys to select a picture mode.
MEMORY SELECT
THEATER STD
THEATER 1
THEATER 2
THEATER 3
THEATER 1
PICTURE ADJUST
CONTRAST +37
THEATER 1
PICTURE ADJUST
COLOR TEMP. L M H
THEATER 1
PICTURE ADJUST
NOISE REDUCTION ON OFF
ITEM
CONTRAST
BRIGHTNESS
COLOR
SHARPNESS
TINT (only for NTSC)
COLOR TEMP. (Color temperature)
NOISE REDUCTION
WHITE ENHANCER
0 99
Weak Strong
Dark Bright
Light Deep
Soft Sharp
R50 G49
Purple Green
L M H
Red Blue
ON/OFF
ON/OFF
OPERATIONS
Memory Select
Picture Adjust Menu