Dish Network Solo 311 - Manual (Page 34)

Page 29
Using the Browse Banner
Page 29
2. Change the channel:
• Enter the channel number for the program that you
want, using the NUMBER PAD buttons.
• Press the UP or DOWN ARROW button to display
the channel that you want.
3. Press the RIGHT ARROW button to display the
next program. Press the LEFT ARROW button to
return to the current program.
Note : The Browse Banner displays programs that are on now. If you
press the RIGHT ARROW, it will display information on the program
that is on next on the same channel. It does not display information for
any other programs in the future and cannot display programs that have
ended.
4. You may press the INFO button for more information about
the program highlighted.
5. Press the SELECT button to change to the highlighted
program.
6. To close the Browse Banner , press the remote control
CANCEL button. The receiver stays tuned to the program
you are watching.
Tip: If the
program is on
some time in the
future, the
receiver will open
the Create An
Event Timer
menu.