If you need more assistance quick start guide – Dish Network Solo 311 User Manual
Page 7
Page 2
Chapter 1
Introduction
I
F
Y
OU
N
EED
M
ORE
A
SSISTANCE
If you need help after you read this guide, choose one of the following
resources:
•
Go to our website at tech.dishnetwork.com
•
Press
MENU
on your remote control and then select
Customer
Service
.
•
Call the Customer Service Center at 1-800-333-DISH (3474). You
can also call the Customer Service number for information on profes-
sional installation.
Q
UICK
S
TART
G
UIDE
These instructions guide you through activating your receiver over the phone
with the Customer Service Center. If you see a screen that asks you to
Begin
Activation
, exit the screen by pressing the DOWN arrow on the remote control
to move the highlight to
Watch TV
and then press the SELECT button.
S
TEP
1: O
RDERING
Y
OUR
P
ROGRAMMING
1. If the receiver is off, press the blank POWER button on
the remote or press the POWER button on the receiver.
2. Press GUIDE
on the remote control.
You will see that some channels appear in white. These channels
can be viewed immediately. However, many channels will be in
red. You cannot view these channels until you order programming.
T
O
ORDER
PROGRAMMING
1. Display the
Important System Information
screen on your
receiver by pressing SYS INFO on the remote.