Denon AVR-3300 - Manual (Page 27)

27
ENGLISH
4
5
6
7
ENTER
ENTER
Enter the setting.
When “8CH IN” is selected, the “System Setup Menu” screen reappears.
Select “Vol. Level”.
Enter the setting.
The “System Setup Menu” reappears.
When “6CH IN & MULTI” is selected, the screen switches to the “Multi Vol. Level” screen.
NOTES:
• When “0dB and “–40dB” are selected, the output level of multi source output is fixed and the volume cannot be adjusted from the remote
control unit.
• When “Variable” is selected, the volume can be adjusted from the remote control unit.
Auto tuner presets
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8 and E1 to 8.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it
using the manual “Preset memory” operation.
1 Use the CURSOR buttons to specify “Auto Tuner Presets” from the
“System Setup Menu” screen.