Denon AVR-3300 - Manual (Page 50)

50
ENGLISH
• Operating the surround mode and surround parameters from the main unit‘s panel.
1 Turn the SELECT knob to select the surround mode.
• When turned clockwise
1 DIRECT 1 STEREO 1 DOLBY/DTS 1 5CH STEREO 1 MONO MOVIE
0 MATRIX 0 VIDEO GAME 0 JAZZ CLUB 0 ROCK ARENA
• When turned counterclockwise
0 DIRECT 0 STEREO 0 DOLBY/DTS 0 5CH STEREO 0 MONO MOVIE
1 MATRIX 1 VIDEO GAME 1 JAZZ CLUB 1 ROCK ARENA
2 Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to “Surround Modes and Parameters” on page 52.
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
(Main unit)
(Main unit)
* To select the surround mode while adjusting the surround parameters, channel volume or tone control, press the surround mode button
then operate the selector.
NOTE:
• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK, ARENA, JAZZ CLUB, VIDEO GAME, MONO MOVIE or
MATRIX surround modes and the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS surround.
(Main unit)