Denon AVR-3300 - Manual (Page 61)

61
ENGLISH
System setup items and default values (set upon shipment from the factory)
Surround modes and parameters
C: Signal/adjustable
D: Selected by speaker configuration setting B: Turned on or off by speaker configuration setting
E: No signal/not adjustable
(Note) When playing Dolby Digital Signal : –1 0 dB
When playing DTS Digital Signal : –10 dB
Signals and adjustability in the different modes
Channel output Parameter (default values are shown in parentheses)
TONE
CONTROL
CINEMA
EQ.
ROOM
SIZE
EFFECT
LEVEL
DELAY
TIME
When playing Dolby
Digital/DTS signals
D. COMP LFE
FRONT
L/R
CENTER
SURROUND
L/R
SUB-
WOOFER
EFFECT
L/R
DIRECT
STEREO
6CH/8CH EXTERNAL INPUT
DOLBY PRO LOGIC
DOLBY DIGITAL
DTS SURROUND
5CH STEREO
ROCK ARENA
JAZZ CLUB
VIDEO GAME
MONO MOVIE
MATRIX
C
C
C
C
C
C
C
C
C
C
C
C
E
E
B
B
B
B
B
B
B
B
B
B
E
E
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
E
E
C
E
E
E
E
E
E
E
E
E
E
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
E
E
E
C (OFF)
C (OFF)
C (OFF)
E
E
E
E
E
E
E
E
E
E
E
E
E
C (Medium)
C (Medium)
C (Medium)
C (Medium)
E
E
E
E
E
E
E
E
C (10)
C (10)
C (10)
C (10)
E
E
E
E
E
E
E
E
E
E
E
E
C (30msec)
C (OFF)
C (OFF)
E
C (OFF)
C (OFF)
C (OFF)
E
E
E
E
E
E
C (Note)
C (Note)
E
C (0dB)
C (Note)
C (Note)
E
E
E
E
E
E
Mode
System setup Default settings
q
w
e
r
t
y
u
i
Speaker
Configuration
(Surround
Speaker
Setting)
Bass Output
Delay Time
Channel
Level
Digital Inputs
On Screen
Display
EXT. IN &
MULTI
Auto Tuner
Presets
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE for full-size,
full-range) to automatically set the composition of the signals output
from the speakers and the frequency response.
Use this function when using multiple surround speaker
combinations for more ideal surround sound. Once the
combinations of surround speakers to be used for the
different surround modes are preset, the surround
speakers are selected automatically according to the
surround mode.
This selects the subwoofer speaker for playing deep bass signals.
This parameter is for optimizing the timing with which the audio
signals are produced from the speakers and subwoofer according to
the listening position.
This adjusts the volume of the signals output from the speakers and
subwoofer for the different channels in order to obtain optimum
effects.
This assigns the digital input jacks for the different input
sources.
This sets whether or not to display the on-screen display that appears
on the monitor screen when the controls on the remote control unit
or main unit are operated (from MONITOR 1 outputs only).
Select one of these to use the external input terminals with 6- or 8-
channel inputs.
Multi-room output is not possible when the 8-channel input is
selected.
When the 6-channel input is selected, set the multi-room output’s
volume level.
FM stations are received automatically and stored in the memory.
Surround
mode
Input
source
Digital
Inputs
Surround
speaker
Front Sp. Center Sp. Surround Sp. Subwoofer
Small
5CH
STEREO
A A
Center
3.6 m (12 ft)
A —
Surround L & R —
3.0 m (10 ft) —
—
Small
DSP
SIMULA-
TION
6CH/8CH
EXT. IN
— —
Yes Large
DOLBY/DTS
SURROUND
A
Bass Out = Subwoofer Only
Front & Subwoofer
3.6 m (12 ft)
Front L
0 dB
CD
COAXIAL
On Screen Display = ON
EXT. IN & MULTI = 6 CH IN & MULTI
MULTI VOL. LEVEL = 0 dB
A1 ~ A8
B1 ~ B8
C1 ~ C8
D1 ~ D8
E1 ~ E8
87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz (for North America mmodel)
87.5/89.1/98.1/108.9/90.1/90.1/90.1/90.1 MHz
(for multiple voltage and Taiwan R.O.C. model)
520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz (for North America mmodel)
522/603/999/1404/1611 kHz/90.1/90.1/90.1 MHz
(for multiple voltage and Taiwan R.O.C. model)
90.1 MHz
90.1 MHz
90.1 MHz
Front R
0 dB
DVD
OPTICAL 1
Subwoofer
0 dB
VDP
OPTICAL 2
TV/DBS
OPTICAL 3
VCR-1
OFF
VCR-2/
V. AUX
— —
OFF — —
Center
0 dB
Surround L
0 dB
Surround R — —
0 dB — —