Datel DKT2104-CT - Manual (Page 23)

Installation
Step 3: Connect Telephone Cords
Strata DKT2004-CT Cordless Digital Telephone 10/02
11
Step 3: Connect Telephone Cords
Your cordless digital telephone can be used as a stand-alone telephone or in
conjunction with your deskset.
There are two telephone line jacks on the back of the base unit of your cordless digital
telephone: “Line In” and “Line Out.” You can connect your cordless digital telephone
to both the telephone line and a Strata CTX digital telephone.
➤
To use as a stand-alone telephone
➤ Connect the modular jack labeled “Line In” to
the telephone wall jack.
➤
To use with a desk telephone
1. Unplug the telephone line cord from your desk
telephone.
2. Connect this cord to “Line In” of your cordless
telephone.
3. Using the two foot modular cord that came with
your cordless telephone, connect the jack
labeled “Line Out” to the desk telephone.
Step 4: Connect and Apply Power to Base
Unit
Note The AC adapter furnished with this telephone may be equipped with a polarized
line plug (a plug having one blade wider than the other). This plug fits into the
power outlet only one way. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug still does not fit, contact your facilities
coordinator about replacing the obsolete plug. Do not alter the shape of the
blades on the polarized plug.
AC Adapter
Wide
Blade
1174
For Sales and Service call 508-580-2500
Tel: 508-580-2500 Datel Communications Fax: 508-583-8412