Datel DKT2104-CT - Manual (Page 29)

Strata DKT2004-CT Cordless Digital Telephone 10/02
17
Configuration
3
This chapter explains how to enter the Programming Mode. Your cordless digital
telephone can operate in either the DKT or the cordless mode and can be programmed
whenever the telephone is idle. When entering the program mode during cordless
operation, all calls coming to this station are ringback tone until the program mode is
ended. Entering the program mode during DKT operation has no effect on current call
status.
Entering Program Mode
1. Remove the handset from the base unit.
2. Press and hold and at the same time.
3. While holding and , press
7$/.
.
4. Release all three keys.
5. Press the 592/ button on the upper right side of the
cordless handset until you toggle to the DATA STORE
settings screen.
6. Press  to toggle the settings for each program step or
store (save) the setting when in DATA STORE step.
7. Press 7$/. at any time to exit PROGRAM without
saving changes. To save the changes step to DATA
STORE and press
 before pressing 7$/. .
1178
1178b
For Sales and Service call 508-580-2500
Tel: 508-580-2500 Datel Communications Fax: 508-583-8412