Datel DKT2104-CT - Manual (Page 43)

Features
Call Forward
Strata DKT2004-CT Cordless Digital Telephone 10/02
31
• Call Forward Busy/Do Not Disturb/No Answer – Forwards all calls to your
station whenever you are busy, in the DND mode, or after ringing and you do not
answer the call within a designated time (set by you when you enable the feature).
• Call Forward Cancel – Cancels the set Call Forward feature. Notice that each
category of Call Forward has a different code for canceling.
Station Call Forward Procedures
The following table contains Call Forward Button sequences. You can do a Call
Forward function by entering the button sequence as described.
Some Call Forward features require a Pass Code entry. Use the following procedure to
change your Pass Code.
➤
To change your Pass Code
➤ Press Extension button +  + ext. no. + old Pass Code (1~15 digits) + + new
Pass Code (1~15 digits) + .
➤
To use the Call Forward button sequence
➤ Follow the instructions in the following table, shown under “Button Sequence.”
Some features require additional input, such as:
• Destination – If the destination is an outside number, press ÆÃ after entering the
destination. The CTX accepts destination numbers of up to 32 digits.
• Timer – This is a two digit entry representing how long (eight to 160 seconds)
your telephone should ring before forwarding the call. If you enter one digit,
you must press
ÆÃ after entering the single digit.
• Pass Code – A four-digit code established by system programming to prevent
unauthorized changes. The code applies to the station to be forwarded; not to
the station entering the code.
Note In the following table, (Tone) means that a confirmation tone will play at that
point in the sequence.
For Sales and Service call 508-580-2500
Tel: 508-580-2500 Datel Communications Fax: 508-583-8412