MK Products Python LX Fronius Com ACWC - Manual (Page 11)

Python ® LX Fronius Compatible™ Owner's Manual - Page 4
Section C Accessories
Optional Kits
Insulated Drive Roll Kits are used to prevent preheating of the aluminum wire
which may soften it and clog the liner. This picking up of current at the drive
rolls rather than at the contact tip is usually not a problem unless using too
large of a contact tip or excessively oxidized aluminum wire.
Insulated Grooved Drive Roll Kit .................................................. 005-0715
For .030" (0.8mm) dia. aluminum wire. Includes insulated groove drive roll
and insulated idler roll assy.
Insulated Grooved Drive Roll Kit .................................................. 005-0716
For .035" (0.9mm) dia. aluminum wire. Includes insulated groove drive roll
and insulated idler roll assy.
Insulated Grooved Drive Roll Kit .................................................. 005-0717
For .040" (1.0mm) dia. aluminum wire. Includes insulated groove drive roll
and insulated idler roll assy.
Insulated Grooved Drive Roll Kit....................................................005-0718
For 3/64" (1.2mm) dia. aluminum wire. Includes insulated groove drive roll
and insulated idler roll assy.
Insulated Grooved Drive Roll Kit....................................................005-0719
For .062" (1.6mm) dia. aluminum wire. Includes insulated groove drive roll
and insulated idler roll assy.
Handle Kit ..........................................................................005-0750-BLACK
Includes left and right handles, screws and drive roll door.
Trigger Kit..........................................................................................005-0726
Trigger kit includes a sensitivity adjustment screw replacement for all Python
LX Fronius Compatible /CobraMAX™ guns.
Barrel Insulator Replacement Kit....................................................005-0696
Includes replacement barrel insulator and taper lock nut.
Conduits
Flat spiral steel conduit for steel & cored wire.
15 ft./4.5m ..................................................................................... 615-0621-15
25 ft./7.6m ..................................................................................... 615-0621-25
35 ft./10.7m ................................................................................... 615-0621-35
50 ft./15.2m ................................................................................... 615-0621-50
Optional nickel tube liner ................................................................ 431-2033
Snake Skins
Snake Skin protective covers are now standard on all guns. You may order
spare replacement covers to protect the lead assy of the gun when the
factory one becomes damaged or worn. It can easily be replaced in the field
by means of Velcro © .
Snake Skin Cover 13ft (for 15ft leads) ............................................... 931-0110
Snake Skin Cover 23ft (for 25ft leads) .............................................. 931-0122
Snake Skin Cover 33ft (for 35ft leads) .............................................. 931-0132
Snake Skin Cover 48ft (for 50ft leads) .............................................. 931-0123
Gas Valve Removal Tool
Gas valve removal is performed by using P/N 931-0105 Gas Valve Removal
Tool. This multifunctional tool has been slotted on one side to encompass
and conform to the gas valve stem and seat into the slotted gas valve body
as seen in Figures 1 and 2. Removal of the gas valve can be accomplished
by turning the gas valve tool counter clockwise. Reinstall by turning clock-
wise. The tool doubles as a bottle opener.