Deutsche Telekom 704PC - Manual (Page 14)

6
Mounting and Commissioning
What Does the Eumex 704PC LAN Require?
Certain prerequisites must be met for the smooth installation and operation of the
Eumex 704PC LAN, the configuration software and the Teledat RVS-COM communi-
cations package:
• You must have a basic Euro-ISDN connection with a network terminator (NTBA) as
supplied by Deutsche Telekom (DSS 1). The Eumex 704PC LAN is not designed to
be operated on any other type of connection and any attempt to do so will lead to
faulty operation.
• Only equipment supplying safety extra low voltage (SELV) and/or complying with
ETS 300 047 may be connected to the Eumex 704PC LAN. Equipment operated in
accordance with its purpose complies with this regulation.
• In order to be able to use the full range of the Eumex 704PC LAN features, you
should only use analogue telephones with DTMF dialling and a flash function (70 -
330 ms).
The minimum system prerequisites for the installation of the Teledat RVS-COM com-
munications software are as follows:
• IBM-compatible PC with hard disk and CD-ROM drive
• CPU speed of 233 MHz or faster
• 64 MB RAM
• Microsoft Windows 98/Me/2000/XP
• One free USB or Ethernet 10BaseT port (network card).
Please note that your PC must have a network card in order to be able to connect to a
LAN port on the Eumex 704PC LAN. If your PC does not have one, please install a
card in accordance with the manufacturer’s instructions.
The data transfer rate of the LAN port on the Eumex 704PC LAN is 10 Mbit/s.
Please note:
Before you install the Eumex 704PC LAN driver software, you must first remove any exist-
ing ISDN card and uninstall any existing CAPI drivers.