Deutsche Telekom 704PC - Manual (Page 52)

44
Configuration via Telephone
Storing Numbers for Speed Dialling
Your Eumex 704PC LAN can save up to 100 telephone numbers, which you can then
dial conveniently using the speed-dialling code digits 00 to 99.
Lift the handset. The configuration mode is active and you hear a special internal
dialling tone.
Select the code digits 61.
Select a double-digit memory location number from 00 to 99
(= speed-dialling code).
Enter the telephone number (up to 24 digits are possible). Do not enter a leading 0,
even in the case of manual external line access seizure.
Press the R-key. You hear a positive acknowledgement tone.
Replace the handset.
Repeat the above procedure for every telephone number/speed-dialling code.
Tip: You can also save all procedures containing the star and hash keys as "tele-
phone numbers." You can thus save the entire call transfer procedure (see p. 28) as a
speed-dialling telephone number, and then activate or deactivate it by means of the
double-digit speed-dialling code.
Deleting Individual/All Speed-dialling Numbers
Lift the handset. The configuration mode is active and you hear a special internal
dialling tone.
Select the code digits 60.
Enter the memory location (i.e. the speed-dialling code, 00 to 99) of the number to be
deleted. If you want to delete all speed-dialling numbers, press the star key twice
instead of the memory location.
Press the hash key. You hear a positive acknowledgement tone.
Replace the handset.
b
6 1
t
t
r q
d
b
6 0
t
# q
d