Deutsche Telekom 704PC - Manual (Page 45)

37
Configuration via Telephone
In order for incoming calls to be signalled on specific terminals, you have to program
call assignment. Here you specify which terminal rings when a certain MSN is called.
You do this by assigning every external number (MSN) to one or more internal lines,
which then signal the call.
Please make a note of your call assignment in the table below.
Call Assignment
Lift the handset. The configuration mode is active and you hear a special internal
dialling tone.
Select the code digits 03.
Select the code digit (1 to 9 or 0) to which the MSN is assigned.
Enter the internal number (11 - 14) on which a call to this MSN is to be signalled.
If you want to assign additional internal numbers, press the star key each time (you
hear the positive acknowledgement tone), and enter the additional internal numbers
(max. four).
Press the hash key. You hear a positive acknowledgement tone.
Replace the handset.
Code digit Calls for MSN: Signalled on telephone:
for MSN: 11 12 13 14
1
2
3
4
5
6
7
8
9
0
b
0 3
t
t
* t
# q
d