Deutsche Telekom 704PC - Manual (Page 28)

20
Telephoning
Making Calls Using Speed Dialling
The Eumex 704PC LAN saves up to 100 speed-dialling numbers (or "destinations").
Every internal subscriber can be granted the right to use these speed-dialling num-
bers. (You edit the relevant settings in the configuration mode.)
Lift the handset. You hear an internal or external dialling tone.
In the case of automatic external line seizure: press the R-key and select the code
digit 6.
In the case of manual external line seizure: select the code digit 6.
Then select a double-digit speed-dialling code number between 00 and 99.
Conduct your conversation.
Speed dialling during an enquiry call is not possible.
Enquiry Calls
Let’s say you want to hold your current call in order to make an enquiry call. The sub-
scriber who is on hold cannot hear your enquiry call. External subscribers on hold
hear an announcement from the telephone exchange.
You are having a conversation with the first subscriber.
Press the R-key (R). You hear an internal dialling tone.
You now have the following options:
• dial an internal number,
• dial 0 and an external number, or
if you want to terminate the first call and continue speaking with the subscriber
involved in the enquiry call, press the R-key and dial 0.
if you want to terminate the first call and continue speaking with the subscriber
involved in the enquiry call, press the R-key and dial 0.
Replace the handset to end the call.
b
r 6
6
t
c
c
r
t
r 0
r 1
d