Dell PowerEdge 4820 User Manual
Page 13
Advertising
Installation Guide
11
2 Remove the right back door.
a
While supporting the door, pull the pin for the top hinge out of the
door’s hinge-pin housing (see Figure 1-3).
You will hear a click as you pull the pin out of the door’s hinge-pin
housing. The hinge pins are designed to prevent them from being
pulled out of the hinge body.
b
Repeat step a for the bottom hinge.
c
Pull the door away from the rack.
Figure 1-3.
Removing the Back Doors
WARNING:
Due to the size and weight of the door, it is recommended that you lay
the removed door flat with its outer surface facing upward.
1
hinge pin
2
hinge body
3
hinge-pin housing
1
2
3
Advertising
This manual is related to the following products: