Op of the rack (see figure 1-4) – Dell PowerEdge 4820 User Manual
Page 15
Advertising
Installation Guide
13
Figure 1-4.
Replacing the Upper Side Panels
Removing the Lower Side Panels
1 Pull both latches down and allow the side panel to swing outward slightly
at the top.
2 Firmly grasp both sides of the panel.
3 Lift the panel upward until the panel hooks clear the holes in the bottom
of the rack frame.
4 Place the panel in a safe location with the panel’s outer surface facing
upward to help prevent damage to its cosmetic coating.
5 Repeat step 1 through step 4 for the other lower side panel.
1
panel lip
2
upper side panel (2)
3
latches (2)
2
3
1
Advertising
This manual is related to the following products: