Nevion Flashlink Compact II - Manual (Page 15)

Flashlink Compact II Rev. A
nevion.com | 15
2.2.5 FC-3G-EO-OE-36
The optical to electrical is always the upper row and the electrical to optical is
always the lower row.
Earth point: For connection to internal earth bar in 19”
Upper BNC: Electrical 3G/HD/SD-SDI outputs.
Lower BNC: Electrical 3G/HD/SD-SDI inputs.
DIP 1 to 8: Configures the Flashlink Compact II. See chapter 5 for more information.
(upper and lower)
Upper RS422: RJ45 connector for connection for Multicon Gyda.
Lower RS422: RJ45 connector for daisy chaining more Flashlink Compact II. This must be
terminated when not used.
Power A: Main DC input connector. Standard 9pin DSUB. Pin 4 is positive voltage
and pin 1 is ground.
Power B: Spare/redundancy DC input connector. Standard 9pin DSUB. Pin 4 is
positive voltage and pin 1 is ground.