Nevion ETH1000-SFP - Manual (Page 4)

ETH1000-SFP Rev. A
nevion.com | 4
1
Product overview
The Flashlink ETH1000-SFP is a 10/100/1000Base-T to 1000Base-X media converter
module. The optical part of the card is based on SFP that makes the optical part
exchangeable in field. The module converts a 10/100/1000Mbps Ethernet signal on copper
to 1000Mbps optical on fibre suitable for medium haul applications. The module has one
electrical Ethernet port, and one optical fibre transceiver port (receiver fibre connector and
transmit fibre connector). The speed on the electrical connector is dependent of the DIP
switch setting or Multicon GYDA control. Speed will upon link connection automatically be
set at the highest possible speed. User can independently enable or disable 10Mbps,
100Mbps or 1000Mbps. The fibre link can be used in one or two fibre installations, or occupy
two wavelengths in a WDM, CWDM or DWDM installation.
Physical
Interface
Ethernet
Optical transmitter
Optical reciver
Microcontroller
Status LED
DIP switch
Optical
output
Optical
input
Remote
control
10/100/1000Mbps
Twisted pair
Ethernet
Figure 1
Figure 2