Nevion ETH1000-SFP - Manual (Page 5)

ETH1000-SFP Rev. A
nevion.com | 5
2
Specifications
2.1 General
Power +5V DC / 2.0W typical with SFP
+5V DC / 0.6W typical without SFP
Control Control system for access to setup and module status with
BITE (Built-In Test Equipment)
Temp. range 0 to +40 °C
2.2 Optical ports
Number of inputs 1
Number of outputs 1
Transmission circuit fiber Single mode 9/125um
Connector SC/UPC, single mode
Optical wavelength ~1260-1620nm
Optical sensitivity See manual for installed SFP
Optical overload See manual for installed SFP
Detector damage threshold See manual for installed SFP
Optical power See manual for installed SFP
Optical wavelength See manual for installed SFP
2.3 Ethernet
10BaseT/100BaseTx/1000BaseT on RJ-45 connectors. Compliant with IEEE 802.3, IEEE
802.3u, IEEE 802.3ab and IEEE 802.3z. Auto speed sensing and MDI/MDI-X.