4 connector module, 1 mounting the connector module, 4connector module – Nevion ETH1000-SFP User Manual
Page 9
Advertising
ETH1000-SFP
Rev. A
nevion.com | 9
4
Connector module
The ETH1000-MKII has a dedicated connector module: ETH1000-C1. This module is
mounted at the rear of the sub-rack. The module is shown in the figure below.
Figure 6
4.1 Mounting the connector module
The details of how the connector module is mounted, is found in the user manual for the sub-
rack frame FR-2RU-10-2.
This manual is also available from our web site:
OPT TX
OPT RX
10/100/1000Base-T
Advertising