Nevion HD-TD-10GX-8-SFP - Manual (Page 5)

HD-TD-10GX-8 Rev. A
nevion.com | 5
1
Connections
The backplane HD-TD-10G-C1 is used for the HD-TD-10GX-8-SFP module. All external
connections are made via the backplane.
The backplane occupies two slots in the Flashlink frame, and the module will then go in the
rightmost of the two slots.
Function Label Connector type
HD/SD-SDI channel 1 Ch1 BNC input
HD/SD-SDI channel 2 Ch2 BNC input
HD/SD-SDI channel 3 Ch3 BNC output
HD/SD-SDI channel 4 Ch4 BNC output
HD/SD-SDI channel 5 Ch5 BNC bidirectional
HD/SD-SDI channel 6 Ch6 BNC bidirectional
HD/SD-SDI channel 7 Ch7 BNC bidirectional
HD/SD-SDI channel 8 Ch8 BNC bidirectional
TX optical port w/cover OPT1 SC/UPC
RX optical port w/cover OPT2 SC/UPC
GPI outputs GPIO TP45, pin 2 (card status, open when
alarm)
TP45, pin 3 (optical alarm),
TP45, pin 6 (channel 1-8 status,
closed when alarm)
GPI inputs GPIO TP45, pin 1 (laser disable, active low)
GPI GND GPIO TP45, pin 8
--- Ethernet TP45
Table 1: Connector functions
Illustration 1: The backplane, HD-TD-10G-C1