Nevion ADC-SDI-CC - Manual (Page 6)

ADC-SDI-CC Rev. 3
DATE: 23 July 2008
Network Electronics AS, P.O.Box 1020, N-3204 Sandefjord, Norway. Tel.: +47 33 48 99 99 – Fax: +47 33 48 99 98
E-mail: [email protected] – Web: http://www.network-electronics.com/
Technical specifications are subject to be changed without notice.
6
2. Specifications
Digital Serial Output
Signal type:
SMPTE 259M / ITU-R BT.601
Connector: BNC
Impedance: 75 ohm
Return loss: >15dB @ 270MHz
Jitter: < 0.2UI
Peak to peak signal level: 800mV ± 80mV
Composite and Y/C Input:
Signal type:
Composite video, PAL 625/50Hz or NTSC 525/60Hz
Y / C (S-video)
Connector: BNC
Impedance: 75 ohm
Signal level: 1Vp-p
Return loss: >40dB
Component and RGB Input:
Signal
rate: 625/50Hz or 525/60Hz
Signal type: RGB without setup, with separate sync.
SMPTE / EBU Y, Cr, Cb
Connector: BNC
Impedance: 75 ohm
Signal level: Y = 1Vp-p. Cb, Cr, R, G, B = 0.7Vp-p
Return loss: >40dB
Processing Performance:
Signal
path: 10 bits
Sampling: 27MHz, 2 x oversampling
Luma/Chrome separation: selectable 5 line adaptive comb filter or chroma trap filter
Video bandwidth: 6MHz
Hue Accuracy 0.5 ° typical
Colour Saturation Accuracy 0.8% typical
Luminance Nonlinearity 0.6% typical
SNR (
unified weighted)
: 66dB typical
Diff. gain: <1.0%
Diff. phase: <1.0 °
Video processing delay 3 video lines
Power:
+5V DC / 2.75W
-15V DC / 0.5W