1 mounting the connector module – Nevion DA-SDI User Manual
Page 9
Advertising
DA-SDI
Rev. H
nevion.com | 9
On DA-SDI-C2 the electrical input signal is connected to the IN BNC and the electrical
outputs are connected to the O1 to O8 BNC’s. Please note that outputs 1 to 6 are non-
inverted and suitable for DVB-ASI, while outputs 7 and 8 are inverting and cannot be
used for DVB-ASI.
Figure 7: Overview of the DA-SDI-C2 connector module.
Unused outputs should be terminated with 75 ohm.
DA-SDI-C2 does not have any GPI alarm outputs.
4.1 Mounting the connector module
The details of how the connector module is mounted, is found in the user manual for
the sub-rack frame FR-2RU-10-2.
Advertising