NewHank BDP 620 - Manual (Page 18)

GB-18
English
BD-Live Connection
This player is capable of accessing content from
the internet. Using this option to control which
websites the BD player is allowed to access
additional content. Available settings are:
Permitted: Allow the inserted Blu-ray disc to
access content from all BD-LiveTM Internet sites
whose Internet address is encoded onto the disc.
There is no danger of malicious code download
from valid commercial Blu-ray discs, but choosing
this option and downloading BD-LiveTM content
via illegally authored Blu-ray discs, or discs
obtained from questionable sources, could result
in malicious code being downloaded onto the Blu-
ray player.
Partial Permitted: Only allow the inserted Blu-
ray disc to download content from a BD-LiveTM
website which has a valid online certificate. This
will reduce the chances of downloading malicious
content onto the player.
Prohibited:Block inserted Blu-ray disc from
accessing BD-LiveTM content over the Internet.
Proxy Setting
Use this option to set the Proxy: Enable, Disable,
Proxy Host, Proxy Port.
Display Setting
HDMI Deep Color
Use this option to set the HDMI deep color as 30
bits, 36 bits, 48 bits or off.
HDMI 1080p 24Hz
Enable/disable HDMI 1080p 24Hz.
Video Process
Video Adjust
Use this option to adjust the brightness, contrast,
hue and saturation.
Press Left/Right direction button to adjust, press
Return button to exit.
Sharpness
Use this option to select the sharpness level of the
video. Available settings are: High, Medium, Low.
Motion Video Process
Video Mode
Use this option to select the video mode. Available
settings are: Standard, Vivid, Smooth.
Audio Setting
TV
TV Screen
Select this option to set the aspect ratio of your
TV, the available settings are: 16:9 Full, 16:9
Normal, 4:3 Pan&Scan, 4:3 Letterbox.
Resolution
Use this option to select the video output
resolution: Auto, 480i/576i, 480p/576p, 720p,
1080i or 1080p*.
Auto: The player will select the resolution that
best matchs your TV automatically.
* The number indicates the number of scanning
lines. I,p indicates the scanning format of an
image signal.
TV System
Use this option to set the TV system in your area:
PAL, NTSC, Auto.
Color Space
Use this option to set the color space as RGB,
YCbCr, YCbCr422 or Full RGB.
Audio Output
Spdif
Use this option to set the SPDIF audio output
format. The available settings are:
Bitstream: Outputs the original signal without
processing.
PCM: Outputs the Linear PCM signal.
OFF:Disables output signal from SPDIF.
HDMI
Use this option to set the audio signal format
when your player is connected to an amplifier
or receiver using an HDMI cable. The available
settings are:
Bitstream: Outputs the original signal without
processing.
PCM: Outputs the Linear PCM signal.
OFF:Disables output signal from HDMI.
Down-Samp
Use this option to select the PCM downsampling
rate of digital audio signal. The available settings
are: 48K, 96K, 192K.
Note: Setting an incorrect PCM sampling rate
may result in unpredictable audio playback.
DRC
Use this option to set the dynamic range
compression as Off, On, Auto.