Denon DRA-397 - Manual (Page 14)

11
ENGLISH
Operation
Playing the input source
Use FUNCTION to select the input source you want to
play.
Use VOLUME to adjust the volume.
• The volume level is displayed on the volume level display.
1
3
Start playback on the selected component.
For operating instructions, refer to the component’s manual.
2
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
VOLUME
[MUTING]
[MODE SELECTOR 2]
[POWER ON]
FUNCTION
[MODE SELECTOR 1]
STATUS
PURE DIRECT
[DIMMER]
[VIDEO SELECT]
<POWER>
FUNCTION STATUS <PRESET •>
<LOUDNESS>
<SELECT>
<SPEAKER> <TONE DEFEAT> VOLUME
<ON/STANDBY> <PHONES>
<CH VOL> PURE DIRECT
<TONE CONTROL>
Before operating Turning the sound off temporarily (MUTING)
Press [MUTING] .
• Canceling MUTING mode:
To cancel the muting mode, either press [MUTING] or adjust the
volume.
Connect the headphones to <PHONES> .
• No sound is produced from the speakers automatically.
NOTE:
• To prevent hearing loss, be careful not to raise the volume level
excessively when using headphones.
Listening over headphones
Switching the speakers
Press <SPEAKER> to turn the corresponding speaker pair
on.
Press <ON/STANDBY> or [POWER ON] .
• The power indicator blinks green and the power turns on.
Press <POWER> .
£ OFF:
The power turns off and the indicator is off.
¢ ON:
The power indicator lights red.
1
4
Set [MODE SELECTOR 1] to “A”. 2
Set [MODE SELECTOR 2] to “CD/iPod”. 3
ENGLISH
FUNCTION