Denon DRA-397 - Manual (Page 20)

Operation Operation
ENGLISH
17
ENGLISH
Multi zone music entertainment system
Multi-zone playback using the ZONE2 and ZONE3 PREOUT terminals
• When the outputs of the ZONE2 (ZONE3) OUT terminals are wired and connected to power amplifiers installed in other rooms, different
sources can be played in rooms other than the MAIN ZONE in which this unit and the playback devices are installed. (Refer to ZONE2
(ZONE3) on the diagram below.)
• When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE
and ZONE2 (ZONE3), the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 (ZONE3) using the remote control
unit.
To control playback devices other than the ones above, either use that device’s remote control unit or preset a separately sold programmable
remote control unit.
• For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.
¢ When using the power amplifier as the MAIN ZONE output
• The DRA-397 is equipped with pre-out terminals for which the volume is adjustable and video output terminals (composite) as the ZONE2
(ZONE3) output terminals, and variable output level as the ZONE2 (ZONE3) output terminals.
[System configuration and connections example]
Using external amplifier.
DRA-397 DVD player
Input
RC-616
Monitor
MAIN ZONE 2.1-channel system
ZONE2 audio out
(Variable out)
System remote
control unit (RC-1052) ZONE3 audio out (Variable out)
ZONE
remote control unit
(RC-1056)
RC-617 RC-617
ZONE remote
control unit
(RC-1056)
ZONE2
video out
ZONE3
video out
FL FR
SW
B B
Power
Amplifer
Power
Amplifer
ZONE2 ZONE3
Monitor Monitor
: Multi source audio signal cable
: Multi source video signal cable
: Room-to-room remote control system
(separately sold) control line
Refer to “Connections” ( page 10).