Denon DRA-397 User Manual
Page 19
Operation
Operation
16
ENGLISH
If the screens above are not displayed, the iPod may not be
properly connected. Check the connections and settings.
Connect the DRA-397 and iPod using the Control
Dock for iPod (ASD-1R) (
page 9).
1
Use
FUNCTION
to select the function assigned in step 2.
• Display “Remote iPod” on the main unit’s display.
3
Assign the input terminal at “Setting the iPod
Assignment” (
page 15).
2
R
e
m
o
t
e
i
P
o
d
Operate using
MENU
,
<SELECT>
,
[D
D H
H F
F G
G]
and
ENTER
while watching the iPod’s screen.
4
Listening to music
• The optional standard Control Dock for iPod is DENON ASD-1R sold
separately.
ENGLISH
Track search:
Press [D
D H
H] during playback.
•
D
D: Move to beginning of previous track
•
H
H: Move to beginning of next track
Repeat play:
Press MODE.
The mode switches as follows each time MODE is pressed.
• Repeat One:
Single track repeat
• Repeat All:
All track repeat
Stop:
Press ENTER for at least 2 seconds during playback.
Shuffle play:
Press MEMORY.
The mode switches as follows each time MEMORY is pressed.
• Shuffle Songs:
Single track shuffle
• Shuffle Albums: Album shuffle
In the Remote mode, only <SELECT>, [D
D H
H F
F G
G], and ENTER can
be used.
• When STATUS is pressed during playback, the front panel display
switches between the title name, artist name and album name.
• Depending on the iPod’s software version, it may not be possible to
operate the iPod from the DRA-397. Use the latest version of the
software. Information on the latest version of the software can be
obtained on the Apple Computer website.
• With the DRA-397 it is possible to display folder names and file
names on the screen like titles. The DRA-397 can display up to 64
characters, consisting of numbers, capital letters and small letters.
A “?” mark is displayed in place of non-compatible characters.
Listening to music in the Browse mode
Use
<SELECT>
or press
[D
D H
H]
to select the music file,
then press
ENTER
or
[G
G]
.
Press [F
F] to return to the music menu screen.
Press
ENTER
or
[G
G]
.
• Playback starts.
1
2
Pause:
Press ENTER during playback.
Press again to resume.
The mode switches between the Remote mode and the Browse
mode if MODE is pressed for at least 2 seconds.
Manual search:
Press and hold in [D
D H
H] during playback.
•
D
D: Fast reverse
•
H
H: Fast forward
Viewing still pictures and videos
(only for iPods equipped with the slideshow /
video function)
Press
MODE
for at least 2 seconds to switch from the
Browse mode to the Remote mode.
• “Remote iPod” is displayed on the DRA-397’s display.
Watching the iPod’s screen, press
[D
D H
H]
to select
“Photos” or “Video”, then press
ENTER
or
[G
G]
.
• The iPod’s photo and video data are displayed on the monitor.
Use this procedure to view photo and video data stored on the iPod
on a monitor.
1
2
• To output photo or video data recorded on the iPod to the monitor,
the iPod’s “TV Out” setting (under “Video Settings”) must be set to
“ON”.
For details, refer to the iPod’s operating instructions.
Disconnecting the iPod
Press
<ON/STANDBY>
or
[POWER OFF]
and set the
DRA-397’s power to the standby mode.
The iPod can be disconnected after switching to a function other
than the one to which the iPod input is assigned.