Niveo Professional NNAS-R4 Quick Installation Guide - Manual (Page 10)

- 10 -
PDC/ADS Mode – Select the mode type of the domain server. This can be
“ADS (Windows 2003/2008 Server)” or “PDC (Windows NT Server)”.
Enable NTLMv2 Authentication – This parameter determines whether or
not smbclient will attempt to authenticate itself using the NTLMv2
encrypted password. If enabled, NAS will only sent NTLMv2 and LMv2
responses. NTLMv2 authentication protocol is available only on
WindowsNT4 with SP4 and Windows 2000 or later. Default is disabled.
Enable Client Channel - This controls whether the client offers or even
demands the use of the netlogon schannel. Default is auto, means it
offers the schannel but does not enforce it.
Reset – Use this button to undo or clear any changes made.
Save – Use this button to save the changes made.
5. A message will be displayed when NAS is successfully joined the domain. Click “OK”.
NOTE: When NAS is successfully joined to the Windows domain, the domain
user accounts will appear in Account list.
For detailed information on how to manage and configure the NAS, refer to the
User’s Manual.