Norsat 100W ATOM - Manual (Page 17)

ATOM 100W Revision 1.1
908236
17 908236_r1.1 - Operator Manual ATOM KU
100W.doc
Command Param-Value
Pairs
Response Format
(enveloping <CR><LF> characters not shown)
getmute None ok value <mute_val>
where:
<mute_val> = output mute value, range 0-1 (0=unit not muted; 1=unit muted)
setmute value (0|1) ok
resetfaults None ok
Table 2-3: Command Response Examples
Command Response
getident
getident<CR> <CR><LF>ok pn AMP-Ku100 swver 1.0.9_2 sn AMP-Ku100-30230 address 7 syn no<CR><LF>
getstatus
getstatus<CR> <CR><LF>ok fault 0xC fwdpwr -38.7 revpwr -40.0 temp 38<CR><LF>
getmute
getmute<CR> <CR><LF>ok value 0<CR><LF>
setmute
setmute value 1<CR> <CR><LF>ok<CR><LF>
Resetfaults
resetfaults<CR> <CR><LF>ok<CR><LF>