Nortec MH Series User Manual

Page 25

Advertising
background image

MH Series | 21

Figure 13: Mounting Process – Step 4

Carefully mount the vertical intermediate support(s) “F” (number depending on the unit size)
onto the threaded bolts of the water tub, then fix each support with two 1/4 UNC nuts and
washers to the water tub (do not overtighten the nuts) and with one hexagon socket screw 1/4

UNC x 1/2" and a washer to the cross beam.

Important: Before tightening the nuts, make sure the holes of the intermediate support sit
solidly on the sheet metal of the water tub and do not stick on the collar of the threaded bolt.

Advertising