Hard drive array (n2 only), Removing a hard drive, Inserting a hard drive – OpenEye OE5 N-Series User Manual

Page 19

Advertising
background image

30723AC

19

HARD DRIVE ARRAY (N2 ONLY)

Hard drives in the N2 NVR are arranged top to bottom in the HDD cage. A minimum of one and a
maximum of four hard drives may be installed in the hard drive cage. The hard drive installed in bay one
contains the operating system and if removed will render the NVR inoperable.

Removing a Hard Drive

1. Push the release button for the drive to remove.

2. Pull the release handle outward, sliding the drive tray out of the drive cage.

Inserting a Hard Drive

1. Slide the drive tray into the drive cage fully.

2. Press the release handle until it clicks, locking the drive tray in place.

Advertising