Orion System OE365-15-EBA - Manual (Page 3)

Technical Guide
E-BUS Adapter Board
3
Overview
Figure 1: E-BUS Adapter Dimensions
MADE IN USA
REV 0
YS102478 EBUS
MS
TP
E
B
U
S
MODULAR
T-
R+
SH
SH
R+
T-
J2 J3
P2 P1
J1
3.00
4.12 1.33
Overview
The OE365-15-EBA E-BUS Adapter Board (Figure 1) is used to
provide a connection point for multiple E-BUS Sensors or Modules
when added communication wiring length is needed.
The E-BUS Adapter Board is also used for connecting an EBTRON ®
GTC-116 Airfl ow Measurement Digital Transmitter, a GreenTrol TM
GA-200-N Transmitter Module with GF Series Airfl ow Monitor-
ing Station, or Paragon MicroTrans
EQ series Airfl ow Measurement
Digital Transmitter to the VCM-X E-BUS Modular Controller*,
RNE Controller*, or VCB-X Controller.
You must wire the EBTRON ® , GreenTrol TM , or Paragon* Airfl ow
Measurement Digital Transmitter to this Adapter Board.
The E-BUS Adapter Board has (4) Modular E-BUS ports, (3) HSSC
Connections, and (2) MSTP E-BUS Connections.
NOTE: With custom VCM-X or RNE software, the Paragon
®
MicroTrans EQ series Air Flow Monitoring Station
can be used and would wire into the E-BUS Adapter
Board the same way.
Revised: 10/23/13