OWON HDS1021M User Manual
OWON Measuring instruments
Advertising
Table of contents
Document Outline
- 1.Declaration of Conformity
- 1.1 Declaration of Conformity
- 1.2 Package Contents
- 2.Safety Information
- 3. General Characteristics
- 4. Performing the General Inspection
- 5. Input Connections
- 6. Using the Scope
- 6.1 About this Chapter
- 6.2 Power-Up the Oscilloscope
- 6.3 Oscilloscope Operation Window
- 6.4 Navigating a Menu
- 6.5 Manually Setting the Vertical System, Horizontal System and Trigger Position
- 6.6 Resetting the Oscilloscope
- 6.7 Input Connections
- 6.8 Displaying an Unknown Signal with Auto Set
- 6.9 Automatic Zero-returning of Trigger Horizontal Position and 50% setting of Trigger Level Position
- 6.10 Automatic Measurements
- 6.11 Freezing the Screen
- 6.12 Using Average for Smoothing Waveforms
- 6.13 Using Persistence to Display Waveforms
- 6.14 Using Peak Detection to Display Glitches
- 6.15 Selecting AC-coupling
- 6.16 Reversing the Polarity of the Displayed Waveform
- 7. Using the Multimeter
- 8.Advanced Function of Oscilloscope
- 8.1 About this Chapter
- 8.2 Setting the Channel
- 8.3 Setting the Trigger System
- 8.4 Triggering Control
- 8.5 Acquiring Mode Setting
- 8.6 Display Setting
- 8.7 Waveform Saving Setups
- 8.8 Function Setting Menu
- 8.9 Making Automatic Measurements
- 8.10 Setting the Cursor Measurements
- 8.11 Autoscale
- 8.12 System State Menu
- 8.13 Setting of Time Base Mode
- 8.14 Data Transmission
- 9.Trouble Shooting
- 10.Appendix