Pacific Research Solutions PET-820 User Manual
Page 47
Pacific Research
PET-820 User Manual
Page 46
5.5.1
TELEPHONE COMPANY REQUIREMENTS
All connections to the telephone network must be made through standard plugs and standard telephone company jacks, or
equivalent, in such a manner as to allow for easy and immediate disconnection of the terminal equipment. If the PET-820 is
unplugged from the jack, this should not interrupt any other equipment still connected to the telephone network. Before
connecting the PET-820 to the telephone network, the telephone company must be notified for the installation of an Universal
Service Order Code (USOC) RJ38X jack. See figure 6.3 for correct wiring of the RJ38X jack.
The FCC prohibits customer provided terminal equipment to be connected to party lines or to be used in conjunction with
coin telephone service.
5.5.2
MALFUNCTION OF EQUIPMENT
In the unlikely event that the PET-820 should ever fail to operate properly, it should be disconnected from the RJ38X jack to
determine if the problem is with the telephone network or with the PET-820. If a problem is found with the PET-820, leave it
disconnected until repaired or replaced.