Canon POWERSHOT SX201S - Manual (Page 134)

Adding Effects with the My Colors Function
134
You can change the color of an image and save it as a separate image.
Refer to p. 76 for details on each menu item.
Choose [My Colors].
● Press the n button, choose the 1
tab and [My Colors], and press the
m
button.
Choose an image.
● Press the
qr buttons or turn the  dial
to choose the image and press the m
button.
Choose a menu option.
● Press the
qr buttons or turn the  dial
to choose an option.
● After choosing the menu option, you can
magnify the image by following the
operations in “Magnifying Images” (p. 121).
● If you press the m button during
magnified display, you can switch to the
original image. Pressing the
n button
restores the menu screen.
● Press the
m button.
Save as a new image and display.
● Perform Steps 4 and 5 on p. 132.
• , and images cannot be trimmed.
• The width and height ratio of an image that can be changed is fixed at
4:3 (for a vertical image 3:4).
• The number of recorded pixels in a trimmed image will be smaller than
before trimming.
Adding Effects with the My Colors
Function
CO
PY