Canon POWERSHOT SX201S - Manual (Page 86)

86
You can choose a specific person’s face to focus on and then shoot.
Set the camera to [Face Detect]
(p. 82).
Set Face Select mode.
● Point the camera toward the face of the
subject and press the
button.
X After [Face Select : On] displays, an
orange face frame
will appear around
the face detected as the main subject.
● Even if the subject moves, the face frame
will follow the subject within a certain
range.
● If a face is not detected, will not
appear.
Choose the face on which to focus.
● If you press the qr buttons or turn the
 dial, the face frame will move to
another face detected by the camera.
● If you press the m button or the
button, the frame around the chosen face
will turn white.
Shoot.
● Press the shutter button halfway. The face
frame of the chosen face will change into
a green
.
● Press the shutter button fully to shoot.
Pressing the l button will display the number of faces detected by the
camera (35 at the most) (orange: main subject’s face, white: detected face).
Choosing the Person to Focus On
(Face Select)
Frame
Confirming the number of detected faces
Pressing the op buttons in Step 3, and choosing , or holding down
the button in Step 4, will cancel Face Select mode.
CO
PY