Canon POWERSHOT SX201S - Manual (Page 149)

Changing Shooting Functions
149
Changing the IS-Mode Settings
● Choose [IS Mode], then press the qr buttons
to choose an option.
Registering Functions to the Button
● Choose [Set Shortcut button], then press the
m button.
● Press the opqr buttons or turn the  dial
to choose the functions to register, then press
the
m button.
● Pressing the button will call up the
registered function.
Continuous
Image stabilization is always on. You
can confirm the result directly on the
display, which makes it easier to check
the composition or focus.
Shoot Only
Image stabilization is only active at the
moment of shooting.
Panning
Image stabilization only counters up
and down motion. This option is
recommended for shooting objects
moving horizontally.
• If camera shake is too strong, attach the camera to a tripod. It is
recommended to set the IS Mode to [Off] when the camera is attached
to a tripod.
• When using [Panning], hold the camera horizontally. Image stabilization
does not work when the camera is held vertically.
CO
PY