HP DeskJet 3700 - Manual (Page 68)

Change from a USB connection to a wireless network
If you first set up your printer and installed the software with a USB cable, directly connecting the printer to
your computer, you can easily change to a wireless network connection. You will need a wireless 802.11b/g/n
network that includes a wireless router or access point.
NOTE: The printer only supports connections using 2.4GHz.
Before changing from a USB connection to a wireless network, make sure that:
● The printer is connected to your computer with the USB cable until you are prompted to disconnect the
cable.
● The computer is connected to the wireless network that you intend to install the printer on.
Change from a USB connection to a wireless network (Windows)
1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 18 .
2. In the printer software, click Tools.
3. Click Device Setup & Software.
4. Select Convert a USB connected printer to wireless. Follow the onscreen instructions.
To change from a USB connection to a wireless network (OS X)
1. Connect the printer to your wireless network.
2. Use 123.hp.com to change the software connection to wireless for this printer.
64 Chapter 7 Connect your printer ENWW