Posiflex PD-6507U - Manual (Page 10)

Mounting PD-6507R onto your HS series Terminal
Please follow the below instructions to install the customer display onto
Posiflex HS series terminals. During installation of PD-6507R, do NOT power
ON the terminal. In the example, HS-2208E POS terminal will be used to
demonstrate how to complete the installation of PD-6507R.
1. Lay your POS terminal on a flat
surface with its rear facing towards
you.
2. Press down the release tab of top I/O
interface cover.
3. Pull the top I/O cover in the
direction shown by the arrow in the
figure to remove the cover.
10