Dynex DX-R24TV - Manual (Page 19)

Using your TV 19
3 Press or to select AUTO PROGRAM, then press or . The AUTO PROGRAM
submenu opens.
4 Press or to select ANTENNA, then press or to select AIR or CABLE.
5 Press or to select START, then press or to start Auto Program.
The TV begins to search for, and memorize, all available TV channels. This process takes
several minutes.
Note: The TV will first memorize analog TV channels. After all available analog channels
have been memorized, it begins memorizing digital TV channels. If you want to stop the
process of memorizing analog TV channels, press MENU. The TV begins memorizing
digital TV channels. If you want to stop the process of memorizing digital TV channels,
press MENU again.
Skipping unwanted channels
After saving channels into memory, you can eliminate unwanted channels from memory so
that only the channels you want to watch are selected with the CH+/- buttons.
To eliminate unwanted channels:
1 Press MENU on the TV or remote. The MAIN MENU opens.
ANTENNA
START
AU TO PROGRAM
AIR
MAIN MENU
PIC TURE
P. LOCK
CLOCK
PRESET
EXTRA