Quantum Composers 9200 Series - Manual (Page 29)

9200 Manual Version 1.6 | Quantum Composers Page 29
* System g ated mode (Pulse Inhibit mode) prevents the channel from being triggered by the channels’
trigger source. When in Pulse Inhibit mode, if a pulse has already started when the gate is active, the
channel pulse will continue normal output; although, the output will not restart on the next trigger pulse
until the gate signal is asserted again.
See “Output Examples” for a visual representation.
**
Channel gated mode (Output Inhibit mode) leaves the base triggering alone and enables/disables
the output directly (i.e. the output will cease immediately upon the disabling of the external gate
signal).
See “Output Examples” for a visual representation.
Pressing the unit’s Run/Stop
will arm the unit. Once the unit is armed, it will begin generating
pulses whenever the external trigger input is in the active state. When the gate is in the active
state, the system timer is reset.
Pressing the unit’s Run/Stop button again
will disarm the unit.
See “Output Examples” for a visual representation.