Quantum Composers 9732 Parallel Configuration - Manual (Page 4)

Operating Results:
The following tests show results upon wiring channels A & B in parallel. It should be noted that on all 3 tests, the
voltage monitor (CH4 in the scope shots) was placed after the blocking diodes and immediately at the load.
Test 1
Channel Parameters
CHA: Amplitude = 2 Amps CHB: Amplitude = 2 Amps
CHA: Width = 0.0005000 s CHB: Width = 0.0005000 s
CHA: Delay = 0 s
CHB: Delay = 0 s
Load Parameters
Total Load Impedance = 0.75 Ω (includes cabling)
Diode Characteristics
Forward Voltage Drop ≤ 1V Reverse Voltage Breakdown = 50V DC Current Rating ≥ 30A
CH1: Pearson I Monitor(0.1V/1A) CH2: I Monitor CHA(0.5V/1A) CH3: I Monitor CHB(0.5V/1A) CH4: V Monitor(0.2V/V)