Features – Relacart Electronics WDC-900 User Manual
Page 4
P5
P6
Features
3.1 Central Controller Unit WDC-900M
Front Panel
Rear Panel
WDC-900M
ONLINE : 006 INFO
SPEAKER : 001 INFO
①
②Receiving Antenna Input Jack A/B (BNC Jack): Attached the antenna directly.
③Data connection Antenna input jack: Attached the antenna directly.
④2 RCA Audio Line Output: Can be connected to mixer or MD recorder.
⑤Balanced Output Jack: XLR type connector. A standard 2 conductor shielded cable can be used to connect the
receiver output to a balanced microphone level input on a mixer or integrated amplifier.
⑥Unbalanced Output Jack: 1/4”(6.3mm) phone jack. Can be connected to an aux-level input of a mixer, guitar amp or
tape recorder.
⑦RS-232 Jack: Can be connected to Automatic Video Tracking System VTS-1000 or the other control systems.
⑧USB jack: connect to computer.
Power Input: IEC type connector for 90V/240V 50/60Hz 20W without user adjustment.
①Power Switch, setting this switch to the ON position cause the Power indicator to light.
②LCD displays operating status.
③Operation keys.
④Headphone jack (Mini-jack).
⑤Headphone volume control.
2
3
4
5
6
7
8
2