REMKO WKF-120-180Duo Electrical wiring - Manual (Page 15)

External probe
The connection of an outdoor probe is always
required for the Smart Control.
n Mount the external probe pointing skyward, in
a north-easterly direction, about 2.5 metres
above the ground. It may not be subjected to
direct sunlight and is to be protected against
excessive wind. Installation above windows or
air ducts is to be avoided.
n In order to carry out the installation, remove the
cover and secure the probe with the screws
provided.
n The customer is recommended to provide a
cable with wire cross-section of 0.5 mm² for
connecting the probe.
Fig. 11: External probe
15