RGBLink VENUS X1 Quick Start - Manual (Page 13)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
12
position.
The standard position and size is: ensure the VGA image overlay on the DVI image, display normally
and without black edges. If there are black edges around VGA image, choose <ZOOM> option in
<INPUT> to adjust.
6. Set the text overlay mode: choose <PRESET> option in <TEXT OVERLAY>, push the knob to enter
into the <PRESET> menu items. Turn the knob to choose the preset mode, for example, set the VGA
text as WhOnBk, choose WhOnBk1 or WhOnBk2 (Note: Text Overlay only support monochrome
subtitles), user can also adjust the <BLEND MODE> or <BLEND LEVEL> to get a better effect.
7. Push the [SAVE/1] button to save the above parameters.
How to User Define the BLACK Key
System default the [BLACK] button as black function. Push the button, its LED light turns on, the output
will be switched to black, push the button again, its LED light is off, and output the video image.
For more details, please refer to: How to Use Black Out .
Besides BLACK, user can define this button as FREEZE, TEST PATTERN and BRIGHT, the
operations are as follows:
1. Push the [MENU] button to enter to the menu items, turn the knob, and choose <SYSTEM>.
2. Push the knob to confirm, turn the knob, and choose <USER DEFINED BUTTON>.
3. Push the knob to confirm, turn the knob, and choose <BLACK KEY>.
4. Push the knob to confirm, turn the knob, and choose <FREEZE>, <TEST PATTERN> or <BRIGHT>,
push the knob to confirm.
(1) If choose <FREEZE>, push the button, its LED light turns on, and freeze the image. Push the
button again, its LED light is off, and output the video image.
(2) If choose <TEST PATTERN>, push the button, its LED light turns on, the output will be switched
to test pattern. There are 66 kinds of test patterns. If choose <AUTO SWITCH>, VENUS X1 will
output all the test patterns one by one, and the interval between is 1 to10S. Push the button
again, its LED light is off, and output the video image.