How to load the saved parameter – RGBLink VENUS X1 Quick Start User Manual
Page 18
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
17
4. Push the [SAVE/1] button again, the button light is off, and disable the SAVE function.
How to Load the Saved Parameter
VENUS X1 provides 36 save preferences, operations are as follows:
1. Push the [LOAD/6] button, the button light is on, and enable the LOAD function.
2. Turn the knob, and choose the position that will load, push the knob to confirm.
3. Push the [LOAD/6] button again, the button light if off, and disable the LOAD function.
RECALL SAVE
—
>SAVE 1
Button on is ready for recall
Button flashes means just recall